HEATED OXYGEN SENSOR (for 2WD) REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH

    A01GLJ9E06

    1. Put protective tape around the front door scuff plate LH.

      Text in Illustration
      *1 Protective Tape

    2. Using moulding remover D, detach the 4 clips.

    3. A01GNER

      Detach the 7 claws and remove the front door scuff plate LH.

  2. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE COWL SIDE TRIM BOARD LH

    A01GK5A

    1. Detach the 3 claws and remove the cowl side trim board LH.

  4. REMOVE COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. REMOVE FRONT FLOOR SILENCER PAD LH

  6. REMOVE FRONT FLOOR SILENCER PAD RH

  7. REMOVE REAR NO. 2 AIR DUCT

  8. REMOVE REAR NO. 1 AIR DUCT

  9. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. A01GLCP

      Interior Side:

      Disconnect the heated oxygen sensor connector.

    2. A01GKDPE01

      Exterior Side:


      1. Remove the grommet.

      2. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

        SST
        09224-00010

  10. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    1. A01GLJ5

      Interior Side:

      Disconnect the heated oxygen sensor connector.

    2. A01GLLLE01

      Exterior Side:


      1. Remove the grommet.

      2. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

        SST
        09224-00010