MASS AIR FLOW METER REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    A01GLQ5E01

    1. While using both hands, lift the rear side of the cover upwards to detach the 4 clips B. Slide the cover towards the front of the vehicle to detach the 2 clips labeled A, and remove the V-bank cover sub-assembly.

      Note

      The V-bank cover sub-assembly may be damaged if its front and rear are lifted at the same time.

  2. REMOVE AIR CLEANER CAP LH

    A01GL3T

    1. Disconnect the mass air flow meter connector.

    2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap LH.

  3. REMOVE AIR CLEANER CAP RH

    A01GI75

    1. Disconnect the mass air flow meter connector.

    2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap RH.

  4. REMOVE MASS AIR FLOW METER (for Bank 1)


    1. A01GLWS

      Remove the 2 screws and mass air flow meter.

  5. REMOVE MASS AIR FLOW METER (for Bank 2)


    1. A01GHWD

      Remove the 2 screws and mass air flow meter.