ACCELERATOR PEDAL INSTALLATION


  1. INSTALL ACCELERATOR PEDAL


    1. A01GLWIE01
      Text in Illustration
      *1 Accelerator Pedal
      *2 Accelerator Pedal Support Bracket
      *3 Spring
      A01GKOV Front of Vehicle
      A01GNZA Push
      A01GN9I Front of Vehicle

      Engage the 3 claws and install the new accelerator pedal.

      Note

      Securely insert a new accelerator pedal into the accelerator pedal support bracket.

  2. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.

    • Avoid physical shocks to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.


    1. Connect the tip of the accelerator pedal sensor assembly to the bracket.

    2. Install the accelerator pedal sensor assembly with the 3 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the accelerator pedal sensor assembly connector.