CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    A01GLQ5E01

    1. While using both hands, lift the rear side of the cover upwards to detach the 4 clips B. Slide the cover towards the front of the vehicle to detach the 2 clips labeled A, and remove the V-bank cover sub-assembly.

      Note

      The V-bank cover sub-assembly may be damaged if its front and rear are lifted at the same time.

  2. REMOVE CAMSHAFT POSITION SENSOR

    A01GIMR

    1. Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor.