SECURITY HORN ASSEMBLY (w/ Built-in Battery type) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL THEFT WARNING SIREN ASSEMBLY


    1. Connect the connector and clamp.

    2. Install the theft warning siren assembly with the 2 nuts.

  2. INSTALL NO. 1 NIGHT VIEW ECU (w/ Night View System)

    Note

    Do not use a No. 1 night view ECU which has been dropped or subjected to any strong shocks.


    1. Install the No. 1 night view ECU with the 3 nuts.

    2. Attach the wire harness clamp.

    3. Connect the 2 connectors.

  3. INSTALL OBJECT RECOGNITION ECU (w/ Lane Keeping Assist System)

    A01GKGX

    1. Attach the 2 clips to install the object recognition ECU.

    2. Install the 2 bolts.

      Torque:
      7.4 N*m  { 75 kgf*cm, 65 in.*lbf }

    3. Connect the 2 connectors.

      Note

      Do not use an object recognition ECU which has been dropped or subjected to any strong shocks.

  4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

    Click here