REAR SEAT INNER BELT ASSEMBLY (for Ottoman) INSPECTION


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY LH (w/ Illumination)

    A01GIAOE02

    1. Check the buckle switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1(+) - 2(E) Fasten the seat belt (buckle switch is ON) Below 1 Ω
        1(+) - 2(E) Release the seat belt (buckle switch is OFF) 10 kΩ or higher

        If the result is not as specified, replace the rear seat inner belt assembly LH.

    2. Check that the LED illuminates.


      1. Apply battery voltage to the front seat inner belt and check that the LED illuminates.

        OK
        Condition Specified Condition

        Battery positive (+) → 3

        Battery negative (-) → 4

        		 LED illuminates

        If the result is not as specified, replace the rear seat inner belt assembly LH.

  2. INSPECT REAR SEAT INNER BELT ASSEMBLY RH (w/ Illumination)

    A01GIAOE03

    1. Check the buckle switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1(+) - 2(E) Fasten the seat belt (buckle switch is ON) Below 1 Ω
        1(+) - 2(E) Release the seat belt (buckle switch is OFF) 10 kΩ or higher

        If the result is not as specified, replace the rear seat inner belt assembly RH.

    2. Check that the LED illuminates.


      1. Apply battery voltage to the front seat inner belt and check that the LED illuminates.

        OK
        Condition Specified Condition

        Battery positive (+) → 3

        Battery negative (-) → 4

        		 LED illuminates

        If the result is not as specified, replace the rear seat inner belt assembly RH.