SEAT BELT WARNING SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

VEHICLE BROUGHT TO WORKSHOP

NEXT

CUSTOMER PROBLEM ANALYSIS

1. Interview the customer to confirm the trouble Click here.

   
   

   NEXT

INSPECT BATTERY VOLTAGE

1. Measure the battery voltage.

   Standard voltage
   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

   
   

   NEXT

CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

1. Use the GTS to check if the CAN communication system is functioning normally.

   
   

   • for LHD Click here

   • for RHD Click here

   Result

   Result	Proceed to
   CAN DTC is not output	A
   CAN DTC is output (for LHD)	B
   CAN DTC is output (for RHD)	C

   
   

   B

   GO TO CAN COMMUNICATION SYSTEM Click here

   C

   GO TO CAN COMMUNICATION SYSTEM Click here

   A

CHECK NO. 1 METER ECU SUB-ASSEMBLY

1. Check that the speedometer and shift indicator on the No. 1 meter ECU sub-assembly operate normally.

   OK
   The speedometer and shift indicator on the No. 1 meter ECU sub-assembly operate normally.

   
   

   NG

   GO TO METER / GAUGE SYSTEM Click here

   OK

PROBLEM SYMPTOMS TABLE

1. Refer to Problem Symptoms Table Click here.

   Result

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   
   

   B

   ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

   A

OVERALL ANALYSIS AND TROUBLESHOOTING*

1. Data List / Active Test Click here.

2. Terminals of ECU Click here.

3. Operation Check Click here.

   
   

   NEXT

REPAIR OR REPLACE

NEXT

CONFIRMATION TEST

NEXT