SIDE AIRBAG SENSOR REMOVAL


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    A01GM4S

    1. Remove the 6 clips and cowl top ventilator louver RH.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH

    Click here

  5. REMOVE FRONT SEAT BELT RETRACTOR COVER LH


    1. A01GIJL

      Disengage the claw and remove the front seat belt retractor cover from the body.

  6. REMOVE SIDE AIRBAG SENSOR ASSEMBLY LH


    1. A01GJJ6

      Remove the bolt and side airbag sensor from the body.

    2. Disconnect the connector.