| Propeller intermediate shaft runout | Maximum | 0.8 mm (0.031 in.) |
| Propeller shaft runout | ||
| Joint angle (for for Long Body) | No. 2 Joint Angle | 0°28' to 1°22' |
| No. 3 Joint Angle | 1°29' to 2°23' | |
| Joint angle (for for Standard Body) | No. 2 Joint Angle | 0°26' to 1°20' |
| No. 3 Joint Angle | 1°40' to 2°34' | |
| Center support bearing washer | Thickness | 2.0 mm(0.0787 in.) |
| 4.5 mm(0.1772 in.) | ||
| 6.5 mm(0.2559 in.) | ||
| 9.0 mm(0.3543 in.) | ||
| 11.0 mm(0.4331 in.) |