| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Camshaft timing oil control valve assembly (for Bank 1) x Cylinder head cover | 10 | 102 | 7 |
| Camshaft timing oil control valve assembly (for Bank 2) x Cylinder head cover | 10 | 102 | 7 |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Camshaft timing control with EDU motor assembly LH x Timing chain cover | 21 | 214 | 15 |
| Camshaft timing control with EDU motor assembly RH x Timing chain cover | 21 | 214 | 15 |
| Engine wire bracket x Timing chain cover | 12 | 122 | 9 |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Throttle body assembly x Intake manifold | 10 | 102 | 7 |
| No. 1 air cleaner inlet x Upper radiator support | 5.0 | 51 | 44 in.*lbf |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| ECM x ECU box | 5.5 | 56 | 49 in.*lbf |
| TCM x ECU box | 5.5 | 56 | 49 in.*lbf |
| Engine room ECU cover x ECU box | 5.5 | 56 | 49 in.*lbf |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Accelerator pedal x Body panel | 5.4 | 55 | 48 in.*lbf |
| Accelerator pedal sensor assembly x Body panel | 5.4 | 55 | 48 in.*lbf |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Mass air flow meter sub-assembly (for Bank 1) x Air cleaner cap sub-assembly LH | 1.0 | 10 | 9 in.*lbf |
| Mass air flow meter sub-assembly (for Bank 2) x Air cleaner cap sub-assembly RH | 1.0 | 10 | 9 in.*lbf |
| Air cleaner cap sub-assembly LH x Intake air connector pipe x Hose clamp | 3.8 | 39 | 34 in.*lbf |
| Air cleaner cap sub-assembly RH x Intake air connector pipe x Hose clamp | 3.8 | 39 | 34 in.*lbf |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Camshaft position sensor x Cylinder head cover RH | 10 | 102 | 7 |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| VVT sensor x Cylinder head cover LH and RH | 10 | 102 | 7 |
| Air cleaner case RH x Cylinder head cover RH | 5.0 | 51 | 44 in.*lbf |
| Air cleaner case LH x Cylinder head cover LH | 5.0 | 51 | 44 in.*lbf |
| Air cleaner case RH x Intake air connector pipe | 3.8 | 39 | 34 in.*lbf |
| Air cleaner case LH x Intake air connector pipe | 3.8 | 39 | 34 in.*lbf |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Crankshaft position sensor x Flywheel housing | 10 | 102 | 7 |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Engine coolant temperature sensor x front water by-pass joint | 20 | 200 | 14 |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Knock sensor x Cylinder block | 20 | 204 | 15 |
| Separator case x Cylinder block | 10 | 102 | 7 |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Air fuel ratio sensor (for Bank 1 Sensor 1) x Exhaust manifold LH | 40 (44) | 408 (449) | 30 (32) |
| Air fuel ratio sensor (for Bank 2 Sensor 1) x Exhaust manifold RH | 40 (44) | 408 (449) | 30 (32) |
(): For use without SST
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Heated oxygen sensor (for Bank 1 Sensor 2) x Front Exhaust Pipe LH | 40 (44) | 408 (449) | 30 (32) |
| Heated oxygen sensor (for Bank 2 Sensor 2) x Front exhaust pipe RH | 40 (44) | 408 (449) | 30 (32) |
(): For use without SST
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Engine oil temperature sensor x Oil filter bracket | 39 | 400 | 29 |