REPAIR INSTRUCTION CUSTOMIZE PARAMETERS


  1. CUSTOMIZE ENTRY AND START SYSTEM (for 1UR-FE, Start Function)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting.

      5. Select the setting by referring to the table below.

        Entry&Start
        Display (Item) Default Content Setting Relevant ECU
        Ignition Available Area All Function to permit opening luggage compartment door Front or All Certification ECU

    2. Customizing with the Multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: SET UP / Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

        Door Lock Settings
        Display Default Content Setting Relevant ECU
        Entry and start system On Function that enables or disables the entry and start system. On or Off Certification ECU

  2. CUSTOMIZE ENTRY AND START SYSTEM (for 1UR-FSE, Start Function)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting.

      5. Select the setting by referring to the table below.

        Entry&Start
        Display (Item) Default Content Setting Relevant ECU
        Ignition Available Area All Function to permit opening luggage compartment door Front or All Certification ECU

    2. Customizing with the Multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: SET UP / Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

        Door Lock Settings
        Display Default Content Setting Relevant ECU
        Entry and start system On Function that enables or disables the entry and start system. On or Off Certification ECU

  3. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus:

      Select: Body / Tilt & Telescopic / Utility / Customize /

    5. Select the setting by referring to the table below.

      Tilt & Telesco:
      DISPLAY DEFAULT CONTENTS SETTING
      Autoaway/Return function ON ON/OFF of the auto away / return function ON/OFF

  4. CUSTOMIZE HEATED STEERING WHEEL SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Air Conditioner / Utility / Customize / Air Conditioner.

      5. Select the setting by referring to the table below.

        Display Default Contents Setting
        Steering Heater Sensitivity Adjust 0 Adjusts the operating time of the steering heater when the engine switch is turned on (IG). +2 / +1 / 0 / -1 / -2
        Steering Heater Auto Function ON Automatic operation of the steering heater when the engine switch is turned on (IG) can be set on or off. ON / OFF

    2. Customizing with the accessory meter


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Body Electrical / Air Conditioner / Utility / Customize / Air Conditioner.

      3. Select the setting by referring to the table below.

        Display Default Contents Setting
        Auto Heated Steering Wheel On Automatic ON setting On / Off
        Auto Heater Str Wheel Time Center(Level3) Adjustment of the length of the OFF timer when automatic is set to ON Level1, Level2, Level3, Level4, Level5

  5. CUSTOMIZE AIR CONDITIONING SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Air Conditioner / Utility / Customize /.

      5. Select the setting by referring to the table below.

        Air Conditioner
        Display Default Contents Setting
        Set Temperature Shift Normal To control with the shifted temperature against the display temperature +2 C, +1 C, Normal, -1 C, -2 C
        Evaporator Control Automatic Function to set the evaporator control to the AUTOMATIC position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up Manual or Automatic
        Compressor Mode Automatic Function to turn the A/C switch ON automatically by pressing the AUTO button when the blower is ON and the A/C switch is OFF Manual or Automatic
        Air Inlet Mode* Automatic In case of turning the A/C switch ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode Manual or Automatic
        Foot/DEF Auto Mode ON Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON ON or OFF
        Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the defroster is ON ON or OFF
        Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature +3 C, +2 C, +1 C, Normal, -1 C, -2 C, -3 C
        Rear A/P HI Set ON Function to permit the Rear A/P HI Set when AUTO MODE is ON ON or OFF
        Filter Sensor Normal Function to change the sensitivity of the air conditioning filter clogging sensor Less, Normal, More
        Emission Gas Sensor Shift Normal Function to change the sensitivity of the exhaust gas sensor Much More, More, Little More, Normal, Little Less, Less, Much Less
        Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow ON or OFF
        ECO MODE Cancel ON Function to cancel the ECO mode drive when item is ON ON or OFF

        • *: except Mid-East

    2. Customizing using the Accessory meter


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Climate Settings /.

      3. Select the setting by referring to the table below:

        Climate Settings
        Display Default Content Setting
        Smog Sensor Sensitivity 0 Changes the sensitivity of the exhaust gas sensor. -3, -2, -1, 0, +1, +2, +3
        Auto A/C Mode On Enables or disables the function which automatically turns the air conditioning on according to the state of the AUTO switch. On or Off
        Efficient Ventilation Mode* On Enables or disables the function which automatically switches between recirculation and fresh air modes when the AUTO switch is on. On or Off

        • *: except Mid-East

  6. CUSTOMIZE SEAT BELT WARNING SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    • These buzzers should be ON for safe driving. Perform this procedure only if it is necessary to set the buzzer to OFF (disabled).


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Combination Meter / Utility / Customize / Warning.

      5. Select the setting by referring to the table below.

        Warning
        Display Default Content Setting Relevant ECU
        Seat belt Warning D/P Function to sound the driver seat belt and passenger seat belt warning buzzer D/P ON, D ON, P ON, D/P OFF No. 1 meter ECU sub-assembly

        Tech Tips

        This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.

  7. CUSTOMIZE THEFT DETERRENT SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / Security or Wireless Door Lock.

    5. Select the setting by referring to the table below.

      Security
      Display Default Contents Setting Relevant ECU
      Warning by Horn*1 ON Function that allows vehicle horns and theft deterrent horn to be used as warning device. ON / OFF Certification ECU
      Intrusion Sensor Sensitivity Level*2 N+Sound

      Sets the sensor sensitivity for operating the alarm when an intrusion is detected.


      • Normal: Use this setting when the customer wants to detect moving objects regardless of whether glass is broken or not.

      • Low: Use this setting when the customer wants the sensitivity to be low. This setting is effective for normal use, but the alarm still operates when a person, pet, etc. is inside of the vehicle when the alarm is set.

      Note

      Using any settings other than N+Sound, Normal and Low is prohibited.

      		 Highest / High / Normal / N+Sound / Low / Lowest
      Intrusion Win Opened OFF Sets the sensitivity of the intrusion sensor when the windows are opened. ON / OFF

      • *1: except Europe

      • *2: w/ Emergency Call Switch

      Wireless Door Lock
      Display Default Contents Setting Relevant ECU
      Panic Function* ON This function operates the theft deterrent system when the panic switch is pressed and held for 1.5 seconds. ON / OFF Certification ECU

      • *: w/ Panic Switch

  8. CUSTOMIZE LIGHTING SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / (desired system).

      5. Select the setting by referring to the table below.

        AFS (w/o Adaptive High Beam System)
        Display Default Contents Setting
        AFS Function ON This function controls the AFS. ON / OFF
        AHS (w/ Adaptive High Beam System)
        Display Default Contents Setting
        AHS Function ON Function to turn the adaptive high beam system on and off. Operates as the automatic high beam system when turned off. ON / OFF
        AFS Function ON This function controls the AFS. ON / OFF
        AHS Operation Pattern Setting Pattern 1

        Operation sensitivity of adaptive high beam system


        • Pattern 1: Normal operation

        • Pattern 2: Relaxes adaptive high beam system operation on winding roads such as mountain road

        • Pattern 3: Sets low vehicle speed at which adaptive high beam system begins to operate*1

        • Pattern 4: Sets low vehicle speed at which adaptive high beam system begins to operate and relaxes adaptive high beam system operation on winding roads such as mountain road*1

        		 Pattern 1 / Pattern 2 / Pattern 3 / Pattern 4
        Residential Area Mode Setting*2 - - -

        Note


        • *1: Patterns 3 and 4 are not used outside of the Middle East.

        • *2: This item does not have a function, so it is not possible to customize.

        Illuminated Entry
        Display Default Contents Setting
        Lighting Time 15 s

        Function to change the lighting time after closing the door.

        (It will quickly fade out in case of turning the engine switch on [IG])

        		 7.5 s / 15 s / 30 s
        I/L when ACC OFF ON Function to light the interior light when the engine switch is operated from on (IG or ACC) to off ON / OFF
        I/L ON W/Door Key Unlock ON Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON / OFF
        Room Light when Aprchd ON Dome light, clock illumination and instrument panel illumination (when approaching vehicle) ON / OFF
        Inside Foot Light ON Interior foot light and inside handle illumination ON / OFF
        Center Console Spot Light ON Center console spot light ON / OFF
        Mirr-Foot-Lgt Approached ON Door mirror foot light (when approaching vehicle) ON / OFF
        Mirr-Foot-Lgt Unlocked ON Door mirror foot light (when unlocking doors) ON / OFF
        S-Belt-Bkl-Lgt/Door Open ON Seat belt buckle illumination (when door is open) ON / OFF
        S-Belt-Bkl-Lgt/ACC OFF ON Seat belt buckle illumination (when electrical accessories are OFF) ON / OFF
        Mirror Foot Light Time 15 s Door mirror foot light illumination duration 0 s / 7.5 s / 15 s / 30 s
        Light Control ON Function to light up door inside handle light and instrument panel illumination when the engine switch is on (IG) and shift position is not P ON / OFF
        Interior Light Control ON This function controls the interior lights. ON / OFF
        Exterior Light Control ON This function controls the door mirror foot lights. ON / OFF
        Instrument Panel Illumination Pattern Pattern 1

        Function to change the illumination pattern of instrument panel illumination.


        • Pattern 1: Flowing illumination

        • Pattern 2: Fade in and fade out

        • OFF: Turns off

        		 Pattern 1 / Pattern 2 / OFF
        Light Control
        Display Default Contents Setting
        Disp Ex ON Sen NORMAL Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light*3 LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
        Disp Ex OFF Sen NORMAL Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light*4 LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
        Light Auto OFF Delay*1 30 s Function to keep on lighting the headlight for a certain period of time after closing all the doors with the engine switch turned from on (IG) to off under the condition that the headlight dimmer switch is at HEAD or AUTO with the headlight ON OFF / 30 s / 60 s / 90 s
        Sensitivity Normal Function to adjust the ambient light sensitivity of the automatic light control system*5 Light2 / Light1 / Normal / Dark1 / Dark2
        Lane CHG Flash CNT 3 times Lane change flasher system OFF / 3 times / 5 times / 7 times / 9 times / 11 times
        Follow Me Home Lighting Time*2 30 s Changes the low beam headlight lighting time when engine switch is off and headlight dimmer switch is pulled to flash headlights once. 30 s / 60 s / 90 s / 120 s
        Light up Clearance Lights at Door Unlock Function ON A function that turns on the clearance lights, taillights, and license plate lights for 15 seconds when the doors are unlocked by an entry unlock operation or wireless unlock operation. ON / OFF

        • *1: w/ Light Auto Turn-off Delay Function

        • *2: w/ Follow Me Home System

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *3
        System Setting A01GJUF
        Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2

        Tech Tips

        When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

        *4
        System Setting A01GJUF
        Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2

        Tech Tips

        When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

        *5
        System Setting A01GJUF
        Setting Dark2 Dark1 Normal Light1 Light2

        Tech Tips

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

    2. Door Linked Map Light and Personal Light Illumination Control

      Mode 1: When door is opened, map light of opened door illuminates, or personal light illuminates

      Mode 2: When door is opened, all map lights and personal lights illuminate

      Mode 3: Map lights and personal lights are not linked to doors


      1. To change modes, press the map light assembly DOOR and ON switch simultaneously, and then turn the engine switch from off to on (IG). Each engine switch off to on (IG) operation will change the mode (Mode 1 → Mode 2 → Mode 3 → Mode 1).

        Tech Tips

        After changing modes, the map light responds by blinking as follows: Mode 1: once; Mode 2: twice; Mode 3: three times.

    3. Customizing Function with Multi-display

      Tech Tips

      The following items can be customized.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle settings / Vehicle customization / Lights settings.

      3. Select the setting by referring to the table below.

        Display Default Contents Setting
        Light sensor sensitivity

        0

        (middle bar)

        		 Adjusts the ambient light sensitivity of the automatic light control system.*2 -2, -1, 0, +1 or +2
        Headlamps auto-off timer*1 30 sec. Function to continue illuminating headlights for a certain period of time after closing driver door with the engine switch turned from on (IG) to off under the condition that the headlight dimmer switch is in the AUTO position with the headlights on. Off, 30 sec., 60 sec. or 90 sec.
        Interior lights off timer 15 sec. This function controls the interior lights. Off, 7.5 sec., 15 sec. or 30 sec.
        Exterior lights off timer 15 sec. This function controls the exterior lights. Off, 7.5 sec., 15 sec. or 30 sec.

        • *1: w/ Light Auto Turn-off Delay Function

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

        *2
        System Setting A01GJUF
        Setting -2 -1 0 +1 +2

        Tech Tips

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

      4. Enter the following menus: Setup / Vehicle / Vehicle settings / Vehicle customization / Other vehicle settings.

      5. Select the setting by referring to the table below.

        Display Default Contents Setting
        Lane change signal flashes 3 Lane change flasher system Off / 3 / 5 / 7 / 9 / 11

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

  9. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize setting.

      5. Select the setting by referring to the table below.

        Door Lock
        Display Default Contents Setting Relevant ECU

        Auto Unlock/Shift

        (Unlock w/ engine switch on (IG), shift P, speed 0 km/h (0 mph))

        ON*3

        OFF*4

        		 Function that unlocks all doors when lever is shifted to P from any position other than P while the engine switch is on (IG) ON/OFF Main body ECU (Driver side junction block)

        All Unlock/Open-Close

        (All unlock w/ D door open-close)

        		 OFF Function that unlocks all other doors when opening driver door within 45 seconds after turning the engine switch is on (IG) ON/OFF Main body ECU (Driver side junction block)

        Unlock Key Twice

        (Unlock w/ 2 times D key operation)

        OFF*1

        ON*2

        		 Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors. ON/OFF Main body ECU (Driver side junction block)

        Auto Lock/Shift

        (Auto lock/shift not P)

        		 OFF With engine running and all doors closed, function that locks all doors when lever is shifted to P from any position other than P ON/OFF Main body ECU (Driver side junction block)
        Auto Lock ON Function that locks all doors when vehicle speed reaches a certain level ON/OFF Main body ECU (Driver side junction block)

        • *1: for Europe, China

        • *2: except Europe, China

        • *3: for China

        • *4: except China

    2. Customizing with the Accessory meter assembly


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

        Door Lock Settings
        Display Default Contents Setting Relevant ECU
        Auto Lock by Speed On Function that locks all doors when the vehicle speed reaches a certain level On or Off Main body ECU (Driver side junction block)
        Auto Lock by Shift from P Off Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed On or Off Main body ECU (Driver side junction block)
        Auto Unlock by Shift to P

        On*3

        Off*4

        		 Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG) On or Off Main body ECU (Driver side junction block)
        Auto Unlock by Driver Door Off Function that unlocks the other doors when the driver door is opened within 45 seconds after the engine switch is turned off On or Off Main body ECU (Driver side junction block)
        Unlock on Second Key Turn

        Off*1

        On*2

        		 Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the Off setting, turning it once unlocks all doors On or Off Main body ECU (Driver side junction block)

        • *1: for Europe, China

        • *2: except Europe, China

        • *3: for China

        • *4: except China

  10. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to record the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting.

      5. Select the setting by referring to the table below.

        Wireless Door Lock:
        Display (Item) Default Contents Setting Relevant ECU
        Hazard Answer Back ON When LOCK switch on transmitter is pressed, this function illuminates hazard warning lights once. When UNLOCK switch is pressed, hazard warning lights illuminate twice ON/OFF Main body ECU (Driver side junction block)
        Wireless Control ON Function that turns wireless door lock function ON or OFF ON/OFF Main body ECU (Driver side junction block)
        Open Door Warning (door ajar warning)*1 ON If door is not completely closed and transmitter LOCK switch is pressed, this function makes buzzer sound for 10 seconds ON/OFF Main body ECU (Driver side junction block)
        Trunk Lid Operation 0.8 s This function changes transmitter operation method for opening luggage compartment door 1 tim ON/2 tim ON/0.8 s/Prohibit Main body ECU (Driver side junction block)
        Unlock 2 Operation

        ON*3

        OFF*2

        		 Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON/OFF Main body ECU (Driver side junction block)
        Auto Lock Time 30 s Function to change time until relocking after unlocking with wireless door lock function 30 s/60 s/120 s Main body ECU (Driver side junction block)

        • *1: except China

        • *2: for Europe and China

        • *3: except Europe and China

    2. Customizing with the Accessory meter assembly


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

        Door Lock Settings
        Display Default Contents Setting Relevant ECU
        Remote 2-Press Unlock

        On*1

        Off*2

        		 Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock On or Off Main body ECU (Driver side junction block)
        Auto Relock Timer 30 sec. Function that regulates the interval between unlocking and automatic relocking of doors 120 sec., 60 sec., 30 sec. or Off Main body ECU (Driver side junction block)
        Lock/Unlock Feedback-Lights On When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice On or Off Main body ECU (Driver side junction block)
        Lock Feedback Volume 5 Bars Wireless door lock buzzer volume 0, 1, 2, 2, 4, 5, 6 or 7 Bars Certification ECU

        • *1: except Europe and China

        • *2: for Europe and China

  11. CUSTOMIZE ENTRY AND START SYSTEM (for Entry Function)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus:


      1. Intelligent tester - Select: Body / Utility / Customize /

    5. Select the setting by referring to the table below.

      Smart Key / Access
      Display (Item) Default Content Setting Relevant ECU
      Park Wait Time (Waiting time to permit unlocking door after locking) 2.5s Function that sets waiting time to permit unlocking door after door is locked with entry lock function 0.5s, 1.5s, 2.5s or 5s Certification ECU
      Ignition Available Area (Entry ignition available area.) All Function that sets the area that the key must be in before the engine switch can be operated. Front or All Certification ECU
      Trunk Open Mode (Luggage compartment door open mode when vehicle is locked) ON Function to permit opening luggage compartment door ON or OFF Certification ECU
      Warning
      Display (Item) Default Content Setting Relevant ECU
      Key Low Battery Warning (Warn when key battery becomes weak) ON Function that warns driver that key's battery power is low ON or OFF Certification ECU

    6. Customizing with the Multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: SET UP/ Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

        Door Lock Settings
        Display (Item) Default Content Setting Relevant ECU
        Select Doors to Unlock Driver's Door Function that sets which doors are unlocked by the entry unlock function. All, Each Door , Driver's Door or Side Doors Certification ECU
        Entry and start system On Function that enables or disables the entry and start system. On or Off Certification ECU

  12. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Warning
        Display Default Content Setting Relevant ECU
        Key Remind Volume Large Function to change the key reminder buzzer sound volume Large, Medium or Small No. 1 meter ECU
        Key Remind Sound Normal Function to change the key reminder buzzer sound frequency Normal, Fast or Slow No. 1 meter ECU
        Seat Belt Warning* D/P ON Function to change the seat belt warning buzzer setting D/P ON, D ON, P ON or D/P OFF No. 1 meter ECU

        • *: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more

        Display
        Display Default Content Setting Relevant ECU
        ECO Drive Indicator Zone ON Function to enable or disable eco driving indicator zone display in the multi-information display ON or OFF No. 1 meter ECU
        ODO Display Time After IG OFF Setting 30 s Function to change the odometer display time 30 s, 60 s, 600 s or OFF No. 1 meter ECU

    2. Customizing with the combination meter


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Settings.

      3. Select the setting by referring to the table below.

        Meter Setting
        Display Default Content Setting Relevant ECU
        Language American English Function to change the multi-information display language American English, Francais, Deutsch, Espanol, Italiano or pyccknn No. 1 meter ECU
        Units km (L/100km) Function to change the multi-information display unit km (km/L) or km (L/100km) No. 1 meter ECU
        ECO lamp ON (Self-lighting) Function to turn on/off the eco light setting ON (Self-lighting), OFF or ON (Always) No. 1 meter ECU
        Drive monitor Cruising range Function to change the drive monitor setting Fuel consumption or Cruising range No. 1 meter ECU
        Lamp brightness Standard Function to change the meter illumination setting Bright or Standard No. 1 meter ECU
        SPORT lamp ON Function to turn on/off the sport light setting ON or OFF No. 1 meter ECU
        Default settings OFF Function to turn on/off the default setting ON or OFF No. 1 meter ECU

  13. CUSTOMIZE LEXUS PARKING ASSIST-SENSOR SYSTEM


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the LEXUS parking assist-sensor system on.

      4. Turn the intelligent tester on.

      5. Enter the following menus: Body Electrical / Utility / Customize / Warning, Sensor or Display

      6. Select the setting by referring to the table below.

        Warning
        Display Default Contents Setting Relevant ECU
        Fr Sensor Onset Range Wide Function to set buzzer activation range (for front sensors) Narrow or Wide Clearance warning ECU
        Rr Sensor Onset Range Wide Function to set buzzer activation range (for rear sensors) Narrow or Wide Clearance warning ECU
        Keep Sense Buzzer Avail Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds Not Avail or Avail Clearance warning ECU
        Fr & Rr Buzzer Freq Middle Buzzer sounding frequency Low, Middle or High Clearance warning ECU
        Fr & Rr Buzzer Volume M2 Buzzer volume setting L, M1, M2, M3 or H Clearance warning ECU
        Sensor
        Display Default Contents Setting Relevant ECU
        Sensor Condition N Avail Function to make sensors available when shift position is N Not Avail or Avail Clearance warning ECU
        Front Side Dist Sensor Long Function to set buzzer activation range (for front sensors) Short or Long Clearance warning ECU
        Reverse Range Front Sensor Fsde Operation setting for vehicle front sensors (front center, front corner, front side) when shift lever is in R position F, Fs,Fc, Fsde or F Stop Clearance warning ECU
        Non P/R Range Rear Sensor R Stop Operation setting for vehicle rear sensors (rear center, rear corner) when shift lever is in position other than P or R R, Rcrn or R Stop Clearance warning ECU
        Display
        Display Default Contents Setting Relevant ECU
        Approach Display OFF Avail Display when moving away from previously detected obstacle Not Avail or Avail Clearance warning ECU
        Display Mode All Display mode setting (when LEXUS parking assist-sensor system is normal) All or Undisp Clearance warning ECU

    2. Customizing with Accessory Meter

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Turn the engine switch on (IG).

      2. Turn the LEXUS parking assist-sensor system on.

      3. Enter the following menus: Setup / Vehicle / LEXUS Park Assist.

      4. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Alert volume 3 Sets the buzzer activation range for the rear center sensors.

        1, 2, 3, 4 or 5


        • 1: Low volume

        • 2: Medium low volume

        • 3: Medium volume

        • 4: Medium high volume

        • 5: High volume

        		 Clearance warning ECU
        Display On The display mode setting (when the LEXUS parking assist-sensor system is normal). On or Off Clearance warning ECU
        Distance Wide Sets the buzzer activation range for the rear center sensors.

        Narrow or Wide


        • Narrow: 600 mm (1.97 ft.)

        • Wide: 1500 mm (4.92 ft.)

        		 Clearance warning ECU

  14. CUSTOMIZE POWER WINDOW CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function(s) can be customized.

    • Be sure to make notes of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch to on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / Power Window.

    5. Select the setting by referring to the table below.

      Power Window:
      Display (Item) Default Contents Setting
      Door Key P/W Up ON Function that raises all power windows when, with engine switch off, key is used to hold driver door key cylinder to lock position for more than 2.3 seconds ON/OFF
      Door Key P/W Down ON Function that lowers all power windows when, with engine switch off, key is used to hold driver door key cylinder to unlock position for more than 2.3 seconds ON/OFF
      P/W Up W/ Transmit OFF Function that raises all power windows when, with engine switch off, lock switch on key is pressed and held for more than 3.0 seconds ON/OFF
      P/W Down W/ Transmit OFF Function that lowers all power windows when, with engine switch off, unlock switch on key is pressed and held for more than 3.0 seconds ON/OFF
      P/W Up W/ Smart ON Function that raises all power windows when, with engine switch off, entry lock switch on driver side door outer handle is pressed and held for more than 3.0 seconds ON/OFF
      P Window Auto Up Avail This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side) Avail/Not Avl
      P Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the front passenger door window using the master switch Avail/Not Avl
      RR Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH Avail/Not Avl
      RR Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear RH door window using the master switch Avail/Not Avl
      RL Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH Avail/Not Avl
      RL Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear LH door window using the master switch Avail/Not Avl

  15. CUSTOMIZE POWER MIRROR CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / Others.

      5. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Reverse Coupled Actuation Mirror Angle (D-Side) User Setting Function that turns the door mirror reverse shift-linked function default setting or user setting Default Setting or User Setting

        • Front multiplex network door ECU LH*1

        • Front multiplex network door ECU RH*2
        Reverse Coupled Actuation Mirror Angle (P-Side) User Setting Function that turns the door mirror reverse shift-linked function default setting or user setting Default Setting or User Setting

        • Front multiplex network door ECU RH*1

        • Front multiplex network door ECU LH*2

        • *1: for LHD

        • *2: for RHD

  16. CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the intelligent tester.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting / Seat.

      5. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Seat Travel Distance*1 Noraml Function to change the Seat Travel Distance. OFF, Short or Noraml Main body ECU (Driver side junction block)
        Slide Link Cushion Length Ctrl*1 Avl Function to the physique compensation Cushion Length control when D-Seat is slide. Not Avl or Avl Front power seat switch
        Slide Link Hdrest Length Ctrl* Avl Function to the physique compensation head-rest control when D-Seat is slide. Not Avl or Avl Front power seat switch
        R&A Lumbar Support Oper*1, *2 ON When the "Return & Away" operates, the function that "Lumbar Support" operates is stopped when it is "OFF". ON or OFF Front power seat switch
        P-Seat Auto Pattern*2 Auto-B Function to select the order of movement when P-seat auto moves. Auto-A, Auto-B or Auto-C No. 2 console switch
        Relax with P-Seat Lift*2 Avail Function to lift up P-seat when P-seat auto moves. Not Avl or Avail No. 2 console switch
        R&A Lumbar Support Oper*2 ON When the "Return & Away" operates, the function that "Ottoman Operation" operates is stopped when it is "OFF". ON or OFF Front power seat switch

        • *1: for Driver Side

        • *2: for Passenger Side

    2. Customizing with the accessory meter


      1. Turn the engine switch on (IG).

      2. Enter the following menus: SET UP / Vehicle / Vehicle Customization / Other vehicle settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Driver's Seat Easy Exit Full Allows customization of the seat movement distance for the power easy access system. Full / Partial / Off Main body ECU (Driver side junction block)

  17. CUSTOMIZE REAR POWER SEAT CONTROL SYSTEM


    1. Customizing Function with intelligent tester

      Tech Tips

      The following items can be customized.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting / Seat.

      5. Select the setting by referring to the table below.

        Display Default Contents Setting Relevant
        Return with Passenger Seat*1 Avl Function to passenger seat move when return mode. Not Avl or Avl Position control ECU RH*2, LH*3

        • *1: w/ Ottoman

        • *2: for LHD

        • *3: for RHD

  18. CUSTOMIZE SEAT HEATER SYSTEM


    1. Customizing Function with intelligent tester

      Tech Tips

      The following items can be customized.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting / Seat.

      5. Select the setting by referring to the table below.

        Display Default Contents Setting Relevant
        Rear Right Seat Heater Sensitivity Adjust 0 When in AUTO, this function automatically adjusts the temperature of the seat climate control. -2/-1/0/+1/+2 Climate control ECU
        Rear Right Seat Heater Auto Function Automatic This function allows the rear seat climate control setting to be selected when the engine switch is on (IG). OFF or Automatic Climate control ECU
        Rear Left Seat Heater Sensitivity Adjust 0 When in AUTO, this function automatically adjusts the temperature of the seat climate control. -2/-1/0/+1/+2 Climate control ECU
        Rear Left Seat Heater Auto Function Automatic This function allows the rear seat climate control setting to be selected when the engine switch is on (IG). OFF or Automatic Climate control ECU

    2. Customizing using the accessory meter assembly


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Climate Settings /.

      3. Select the setting by referring to the table below:

        Climate Settings
        Display Default Contents Setting Relevant
        Auto Seat HTR Temp. RR L 0 When in AUTO, this function automatically adjusts the temperature of the seat climate control. -2/-1/0/+1/+2 Climate control ECU
        Auto Seat HTR Temp. RR R 0 When in AUTO, this function automatically adjusts the temperature of the seat climate control. -2/-1/0/+1/+2 Climate control ECU
        Auto Seat HTR RR L Default ON This function allows the rear seat climate control setting to be selected when the engine switch is on (IG). ON/OFF Climate control ECU
        Auto Seat HTR RR R Default ON This function allows the rear seat climate control setting to be selected when the engine switch is on (IG). ON/OFF Climate control ECU

  19. CUSTOMIZE CLIMATE CONTROL SEAT SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting / Seat.

      5. Select the setting by referring to the table below.

        Display Default Contents Setting Relevant
        Front Right Seat A/C Sensitivity Adiust Normal When in AUTO, this function automatically adjusts the temperature of the seat climate control. +2 C, +1 C, Normal, -1 C, -2 C Climate control ECU
        Front Right Auto Quick Seater Heater Function ON ON/OFF setting of the fast acting seat heater OFF / ON Climate control ECU
        Front Right Auto Quick Seater Heater Quick Timer Adjust Short Timer setting when the heater is on STD, Short, Long Climate control ECU
        Front Left Seat A/C Sensitivity Adiust Normal When in AUTO, this function automatically adjusts the temperature of the seat climate control. +2 C, +1 C, Normal, -1 C, -2 C Climate control ECU
        Front Left Auto Quick Seater Heater Function ON ON/OFF setting of the fast acting seat heater OFF / ON Climate control ECU
        Front Left Auto Quick Seater Heater Quick Timer Adjust Short Timer setting when the heater is on STD, Short, Long Climate control ECU
        Rear Right Seat A/C Sensitivity Adiust Normal When in AUTO, this function automatically adjusts the temperature of the seat climate control. +2 C, +1 C, Normal, -1 C, -2 C Climate control ECU
        Rear Right Seat A/C Auto Function Automatic This function allows the rear seat climate control setting to be selected when the engine switch is on (IG). OFF or Automatic Climate control ECU
        Rear Right Auto Quick Seater Heater Function ON ON/OFF setting of the fast acting seat heater OFF / ON Climate control ECU
        Rear Right Auto Quick Seater Heater Quick Timer Adjust Short Timer setting when the heater is on STD, Short, Long Climate control ECU
        Rear Left Seat A/C Sensitivity Adiust Normal When in AUTO, this function automatically adjusts the temperature of the seat climate control. +2 C, +1 C, Normal, -1 C, -2 C Climate control ECU
        Rear Left Seat A/C Auto Function Automatic This function allows the rear seat climate control setting to be selected when the engine switch is on (IG). OFF or Automatic Climate control ECU
        Rear Left Auto Quick Seater Heater Function ON ON/OFF setting of the fast acting seat heater OFF / ON Climate control ECU
        Rear Left Auto Quick Seater Heater Quick Timer Adjust Short Timer setting when the heater is on STD, Short, Long Climate control ECU

    2. Customizing using the Accessory meter


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Climate Settings /.

      3. Select the setting by referring to the table below:

        Climate Settings
        Display Default Contents Setting Relevant
        Auto Seat A/C HTER Temp. FR L 0 The sensitivity setting for the seat when in Auto -2/-1/0/+1/+2 Climate control ECU
        Auto Seat A/C HTER Temp. FR R 0 The sensitivity setting for the seat when in Auto -2/-1/0/+1/+2 Climate control ECU
        Auto Seat A/C HTER Temp. RR L 0 The sensitivity setting for the seat when in Auto -2/-1/0/+1/+2 Climate control ECU
        Auto Seat A/C HTER Temp. RR R 0 The sensitivity setting for the seat when in Auto -2/-1/0/+1/+2 Climate control ECU
        Auto Seat A/C HTR RR L Default OFF The climate control operation setting for the seat when in Auto OFF / ON Climate control ECU
        Auto Seat A/C HTR RR R Default OFF The climate control operation setting for the seat when in Auto OFF / ON Climate control ECU

  20. CUSTOMIZE POWER TRUNK LID SYSTEM

    Tech Tips

    The following item can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Customize Setting / Back Door or Door Lock.

    5. Select the setting by referring to the table below:

      Back Door
      Display Default Contents Setting
      PBD Power Operation ON Turns power trunk opener and closer function ON or OFF. ON or OFF
      Door Lock
      Display Default Contents Setting
      Trunk Link with Door Lock ON Function that opens the luggage compartment door when the luggage electrical key switch is pressed and all doors are unlocked. ON / OFF

  21. CUSTOMIZE REAR SUNSHADE SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus:


      1. Select: Body / Main Body / Utility / Customize /

    5. Select the setting by referring to the table below.

      Others
      Display Default Contents Setting
      Rear Shade Delay Time 0.7 s Function to adjust reverse-linked sunshade lowering function's response time 0.7 s / 1.2 s / 0.9 s / 0.0 s
      R-pos to Rear Sun Shade COM ON Reverse linked function ON or OFF

  22. CUSTOMIZE SLIDING ROOF SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the tester on.

    4. Enter the following menus:

      Intelligent tester - Select: Body / (desired system) / Utility / Customize /

    5. Select the setting by referring to the table below.

      Sliding Roof
      Display (Item) Default Contents Setting

      Door Key Related

      (Open)

      		 ON Function to manually open sliding roof linked with power window if holding driver side door key for 3 seconds or more to unlock position when engine switch is off ON / OFF

      Door Key Related

      (Close)

      		 ON Function to manually close sliding roof linked with power window if holding driver side door key for 3 seconds or more to lock position when engine switch is off ON / OFF

      Wireless Key Rel

      (Open)

      		 ON Function to manually open sliding roof linked with power window if pressing transmitter UNLOCK switch for 3 seconds or more when engine switch is off ON / OFF

      Wireless Key Rel

      (Close)

      		 ON Function to manually close sliding roof linked with power window if pressing transmitter LOCK switch for 3 seconds or more when engine switch is off ON / OFF
      Door Handle Lock Button ON Function to manually close sliding roof linked with power window if pushing door lock switch for 3 seconds or more when engine switch is off and key is outside vehicle ON / OFF
      Door Key Rel Operation SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by holding driver side door key for 3 seconds or more to unlock position when engine switch is off TILT / SLIDE
      Wireless Key Rel Operation SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by pressing on transmitter UNLOCK switch for 3 seconds or more when engine switch is off TILT / SLIDE