ДАТЧИК ДАВЛЕНИЯ МАСЛА УСТАНОВКА

INSTALL OIL PRESSURE SENSOR

1. Coat the O-ring of the pressure sensor with Toyota Genuine CVT Fluid TC.

2. Using SST, install the oil pressure sensor.

   SST

   09326-22011

   Torque:

   without SST

   21 N*m  { 210 kgf*cm, 15 ft.*lbf }

   with SST

   16 N*m  { 159 kgf*cm, 12 ft.*lbf }

   Note

   
   

   • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 155 mm (6.10 in.).

   • The "with SST" torque value is effective when SST is parallel to the torque wrench Click here.

3. Connect the oil pressure sensor connector.

INSTALL REAR ENGINE UNDER COVER LH

RESET MEMORY