МАСЛЯНЫЙ ПОДДОН СНЯТИЕ


  1. REMOVE FRONT WHEEL LH

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. REMOVE REAR ENGINE UNDER COVER LH

  4. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH

    Tech Tips

    Порядок выполнения работ такой же, как для правой стороны.

  5. REMOVE NO. 1 TRANSMISSION OIL FILLER TUBE


    1. A01CEWO

      Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.

    2. A01CFJYE01
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube

      Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the oil pan and drain the continuously variable transaxle fluid.

  6. REMOVE TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. A01CBPRE01

      Remove the 19 bolts and oil pan from the transaxle.

      Note

      Some fluid will remain in the oil pan. To prevent the fluid from spilling, place a container under the oil pan, and then carefully remove all the pan bolts and oil pan sub-assembly.

    2. Remove the gasket from the oil pan.

    3. A01CBKYE02
      Text in Illustration
      *1 Magnet

      Remove the 3 magnets from the oil pan.

      Note


      • Clean the oil pan and remove any metal particles, sludge, etc.

      • Clean off any metal particles that adhere to the magnets.