МАСЛЯНЫЙ НАСОС ПОВТОРНАЯ СБОРКА


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. A01CERIE01

      Using SST, install a new oil seal to the pump.

      SST
      09350-32014   ( 09351-32140 )

      Tech Tips

      The seal end should be flush with the outer edge of the oil pump.

    2. Coat the lip of the oil seal with petroleum jelly.

  2. INSTALL FRONT OIL PUMP BODY O-RING


    1. A01CFWUE03

      Coat a new front oil pump body O-ring with ATF, and install it to the oil pump body.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. A01CC5HE03
      Text in Illustration
      *a Mark

      Coat the front oil pump driven gear with ATF, and install it to the oil pump body with the marked side facing upward.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR


    1. A01CAL1E26
      Text in Illustration
      *a Mark

      Coat the front oil pump drive gear with ATF, and install it to the oil pump body with the marked side facing upward.

  5. INSTALL STATOR SHAFT ASSEMBLY


    1. A01CCVXE01

      Set the stator shaft assembly by aligning each bolt hole.

    2. Using a T30 ''TORX'' socket, install the 11 bolts.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  6. INSTALL CLUTCH DRUM OIL SEAL RING

    A01CAMAE01

    1. Install the 2 clutch drum oil seal rings.

      Note

      Do not expand the ring ends excessively.

  7. INSPECT OIL PUMP ASSEMBLY


    1. A01CG18E01

      Turn the drive gear with 2 screwdrivers and make sure it rotates smoothly.

      Note

      Be careful not to damage the oil seal lip.