ЖГУТ ЭЛЕКТРОПРОВОДКИ ТРАНСМИССИИ УСТАНОВКА


  1. INSTALL TRANSMISSION WIRE


    1. Coat a new O-ring with ATF and install it to the transmission wire.

    2. Install the transmission wire.

    3. Install the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Connect the transmission wire connector.

    5. Coat the O-ring of the ATF temperature sensor and the bolt with ATF.

    6. Install the ATF temperature sensor with the lock plate and bolt.

      Torque:
      6.6 N*m  { 67 kgf*cm, 58 in.*lbf }

    7. Connect the 5 shift solenoid valve connectors.

  2. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. A01CCWIE01
      Text in Illustration
      *1 Magnet

      Install the 3 magnets in the automatic transaxle oil pan sub-assembly.

    2. Install a new gasket and the automatic transaxle oil pan sub-assembly with the 18 bolts.

      Torque:
      7.6 N*m  { 77 kgf*cm, 67 in.*lbf }

  3. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT LH

    Tech Tips

    Порядок выполнения работ такой же, как для правой стороны.

  4. INSTALL REAR ENGINE UNDER COVER LH

  5. INSTALL NO. 1 ENGINE UNDER COVER

  6. ADD AUTOMATIC TRANSAXLE FLUID

    Fluid type
    Toyota Genuine ATF WS

  7. INSPECT TRANSAXLE FLUID LEVEL

    Click here