СИСТЕМА АВТОМАТИЧЕСКОЙ ТРАНСМИССИИ ПРОВЕРКА РУЧНОГО ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ

The purpose of this manual shifting test is to determine whether a problem is caused by either mechanical or electrical factors. Disconnecting the transmission wire disables electrically-controlled automatic gear shifting. In this case, operating the shift lever is the only way to shift the transaxle gear. If the gear is not changed by shift lever operation, it is assumed that there is a mechanical problem.

1. 

   Turn the engine switch off.

2. Disconnect the transmission wire connector.

3. Warm up the engine.

4. Drive the vehicle.

5. Drive with the transmission wire disconnected. Shifting the shift lever to the D position to check whether the shifting condition changes the table below.

   Standard:

   Shift Position	Shifting Condition
   D	No Shift (Not Change)

6. Turn the engine switch off.

7. Connect the transmission wire connector.

8. Clear DTCs Click here.