РЕЛЕ ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ


  1. INSPECT STARTER RELAY


    1. A01CG0EE26

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the resistance is not as specified, replace the relay.

  2. INSPECT STARTER CUT RELAY


    1. A01CG0EE26

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Terminal Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the resistance is not as specified, replace the relay.