ДАТЧИК УРОВНЯ ТОПЛИВА В СБОРЕ СНЯТИЕ


  1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE


    1. Remove the fuel suction tube assembly with pump and gauge Click here.

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01CDDA

      Disconnect the harness clamp and remove the 2 harness protectors from the wire harness.

      Note

      Do not damage the wire harness.

    2. A01CG5J

      Disconnect the connector of the fuel sender gauge assembly.

    3. A01CBLVE01

      Disconnect the wire harness from the 4 harness clamps.

      Note

      Do not damage the wire harness.

    4. Release the lock as shown in the illustration and slide the fuel sender gauge assembly to remove it.