REMOVE FRONT SPOILER (w/ Front Spoiler)
REMOVE FRONT BUMPER COVER
Apply protective tape to the outer circumference of the front bumper cover, as shown in the illustration.
| *1 | Protective Tape |
Using a clip remover, remove the clip.
Remove the 3 bolts, 5 screws and 2 clips.
Disengage the 10 claws and remove the front bumper cover.
Disconnect the connectors.
Tech Tips
If the vehicle is equipped with fog light and daytime running lights, disconnect the connectors.
Remove the 2 clips.
REMOVE FRONT BUMPER LOWER ABSORBER
Remove the 8 bolts and 2 screws.
Disengage the 2 claws and remove the front bumper lower absorber.
REMOVE HEADLIGHT UNIT LH
Remove the 3 screws.
Disconnect the connectors and remove the headlight unit.
REMOVE HEADLIGHT UNIT RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE FRONT BUMPER SIDE RETAINER LH
Disengage the 2 claws and remove the front bumper side retainer.
REMOVE FRONT BUMPER SIDE RETAINER RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE FRONT BUMPER ENERGY ABSORBER
Disengage the 2 guides and remove the front bumper energy absorber.
REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
Using a clip remover, remove the clip.
Disengage the claw.
Remove the 8 bolts, 2 hooks and front bumper reinforcement sub-assembly.
REMOVE HOOD TO FRONT END PANEL SEAL
Disengage the 2 side hooks.
Disengage the 13 clips and remove the hood to front end panel seal.
REMOVE RADIATOR GRILLE EMBLEM
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the radiator grille emblem.
REMOVE RADIATOR GRILLE
Disengage the 23 claws and remove the radiator grille.
REMOVE DAYTIME RUNNING LIGHT ASSEMBLY (w/ Daytime Running Light)
Remove the 3 screws.
Tech Tips
Use the same procedure for both sides.
REMOVE RADIATOR LOWER GRILLE
Disengage the 20 claws and remove the radiator lower grille.
REMOVE FRONT BUMPER LOWER COVER
Disengage the 3 claws and remove the front bumper lower cover.
REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
Disconnect the connector.
Remove the screw.
Disengage the 2 guides to remove the fog light assembly.
REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FOG LIGHT COVER LH (w/ Fog Light)
Disengage the 3 claws and remove the fog light cover.
REMOVE FOG LIGHT COVER RH (w/ Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light)
Remove the bolt.
Disengage the 3 claws and remove the fog light mounting bracket.
REMOVE FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FOG LIGHT COVER LH (w/o Fog Light)
Disengage the 3 claws and remove the fog light cover.
REMOVE FOG LIGHT COVER RH (w/o Fog Light)
Tech Tips
Use the same procedure as for the LH side.