FRONT BUMPER REMOVAL


  1. REMOVE FRONT BUMPER COVER

    A0138EUE01

    1. Apply protective tape to the outer circumference of the front bumper cover, as shown in the illustration.

    2. Using a clip remover, remove the clip.

    3. Remove the 3 bolts, 5 screws and 2 clips.

    4. A0138OQ

      Disengage the 13 claws and remove the front bumper cover.

    5. A0136W3

      Remove the 2 clips.

  2. REMOVE ENGINE UNDER COVER AIR GUIDE

    A0137K9

    1. Remove the 9 bolts and 2 screws.

    2. Disengage the 2 claws and remove the engine under cover air guide.

  3. REMOVE HEADLIGHT UNIT LH

    A0137LE

    1. Remove the 3 screws.

    2. Disconnect the 4 connectors, then remove the headlight unit LH.

  4. REMOVE HEADLIGHT UNIT RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE FRONT BUMPER SIDE RETAINER LH

    A0137UE

    1. Disengage the 2 claws and remove the front bumper side retainer.

  6. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

    A0137J8

    1. Using a clip remover, remove the clip.

    2. Disengage the claw.

    3. Remove the 8 bolts, 2 hooks and front bumper reinforcement.

  8. REMOVE HOOD TO FRONT END PANEL SEAL

    A0138AY

    1. Disengage the 3 clips and remove the 2 hood to front end panel seals.

  9. REMOVE RADIATOR GRILLE EMBLEM

    A0138JI

    1. Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the radiator grille emblem.

  10. REMOVE RADIATOR GRILLE

    A01385L

    1. Disengage the 21 claws and remove the radiator grille.

  11. REMOVE RADIATOR GRILLE LOWER

    A0138P7

    1. Disengage the 24 claws and remove the radiator grille lower.

  12. REMOVE FOG LIGHT COVER LH


    1. A01370G

      Disengage the 4 claws and 2 guides and remove the fog light cover.

  13. REMOVE FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. REMOVE FRONT BUMPER SIDE MOULDING LH

    A0135ZO

    1. Disengage the 8 claws and remove the front bumper side moulding.

  15. REMOVE FRONT BUMPER SIDE MOULDING RH

    Tech Tips

    Use the same procedure as for the LH side.

  16. REMOVE FRONT BUMPER HOLE COVER RH

    A0135YZ

    1. Disengage the 3 claws and remove the front bumper hole cover.