HOOD ADJUSTMENT

A0136DPE01

Tech Tips


  • Centering bolts are used to mount the hood hinge and hood lock. The hood and hood lock cannot be adjusted with the centering bolts on. Substitute standard bolts (with washers) for the centering bolts when making adjustments.

  • For bolts without torque specifications, check the standard bolt chart.


  1. INSPECT HOOD


    1. Check that the clearance measurements are within the standard ranges.

      A013927E03

  2. ADJUST HOOD


    1. A0137KU

      Loosen the hood side hinge bolts.

    2. Move the hood to adjust the clearance to within the standard range.

    3. Tighten the hood side hinge bolts after the adjustment.

      Torque:
      11.5 N*m  { 117 kgf*cm, 8 ft.*lbf }
    4. A0136KV

      Adjust the height of the hood front end by turning the cushion rubber.

      Tech Tips

      The cushion rubber can be raised and lowered by turning it.

    5. A0136UQ

      Adjust the hood lock.


      1. Loosen the 2 bolts.

      2. Adjust the hood lock position so that the striker can enter it smoothly.

      3. Tighten the 2 bolts and nut after the adjustment.

        Torque:
        12 N*m  { 122 kgf*cm, 9 ft.*lbf }