FRONT DOOR BELT MOULDING INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT DOOR BELT MOULDING (for 5 Door)

    A01365KE01

    1. Engage the 5 claws and install the front door belt moulding.

    2. Remove the protective tape.

  2. INSTALL FRONT DOOR BELT MOULDING (for 3 Door)

    A0137GYE01

    1. Engage the 6 claws and install the front door belt moulding.

    2. Remove the protective tape.

  3. INSTALL OUTER REAR VIEW MIRROR

    A0138TB

    1. Install the outer rear view mirror assembly LH with the 3 screws.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      Note


      • Do not tighten the screws to more than the specified torque.

      • Before tightening the screws to the specified torque, provisionally tighten the screws by hand to fit the threads. Do not remove and reinstall the screws more than twice, when reusing a mirror.

  4. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

    A0137G6E01

    1. Engage the 2 clips and install the 2 screws.

  5. INSTALL FRONT DOOR FRONT LOWER FRAME COVER UPPER

    A0136I0

    1. Install the front door front lower frame cover upper by sliding it in the direction indicated by the arrow.