FRONT POWER WINDOW SWITCH REMOVAL

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY

    A0136EDE01

    1. Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the front door armrest base panel upper LH.

    2. Disconnect the connector.

    3. A01390RE01

      Disengage the 2 claws and remove the power window regulator switch assembly from the front door armrest base panel upper LH.