BACK DOOR GLASS ADJUSTMENT


  1. INSPECT BACK DOOR GLASS


    1. Check that the clearance measurements of areas A to H are within the standard ranges.

      A0137STE01
      Standard
      Area Measurement Area Measurement
      A 3.0 to 7.0 mm (0.118 to 0.276 in.) E 12.1 to 15.1 mm (0.476 to 0.594 in.)
      B 3.5 to 6.5 mm (0.138 to 0.256 in.) F 12.1 to 15.1 mm (0.476 to 0.594 in.)
      C 12.1 to 15.1 mm (0.476 to 0.594 in.) G 0 mm (0 in.)
      D 12.1 to 15.1 mm (0.476 to 0.594 in.) H 5.5 to 10.5 mm (0.217 to 0.413 in.)

  2. ADJUST BACK DOOR GLASS

    A01391D

    1. Loosen the glass side hinge bolts and adjust the glass position.

    2. Tighten the glass side hinge bolts after the adjustment.

      Torque:
      17 N*m  { 168 kgf*cm, 12 ft.*lbf }
    3. A0136AX

      Adjust the striker position by slightly loosening the striker mounting bolts and hitting the striker with a plastic hammer.

    4. Tighten the striker mounting bolts after the adjustment.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }