AUDIO AND VISUAL SYSTEM (w/o Microphone) CD cannot be Inserted or is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK WETHER A NORMAL CD IS INSERTED

   
   

   1. Check whether a normal CD is inserted.

      
      

      1. Make sure that the CD is a normal audio CD, and that there is no deformation, flaws, stains, burrs or other defects on the CD.

         OK
         A normal audio CD is inserted.

         Tech Tips

         
         

         • Translucent or oddly-shaped CDs cannot be played.

         • Computer CD-ROMs (even those with music) and CD-R discs cannot be played.

   
   

   NG

   CD IS FAULTY

   OK

2. CHECK WETHER CD IS INSERTED PROPERLY

   
   

   1. Check whether the CD is inserted properly.

      
      

      1. Check whether or not the CD is inserted upside down.

         OK
         Not upside down.

   
   

   NG

   SET DISC CORRECTLY

   OK

3. DISC CLEANING

   
   

   1. Clean the disc.

      
      

      1. If the disc gets dirty, clean the disc by wiping the surface from the center to the outside, in a radial direction, with a soft cloth.

         OK
         The malfunction disappears.

         Note

         Do not use a conventional record cleaner or anti-static preservative.

   
   

   OK

   DISC IS DIRTY

   NG

4. REPLACE CD WITH ANOTHER AND RECHECK

   
   

   1. Replace the CD with another and recheck.

      
      

      1. Replace the CD with another normal one to see whether the same trouble occurs again.

         OK
         The malfunction disappears.

   
   

   NG

   REPLACE RADIO RECEIVER

   OK

   CD IS FAULTY