AUDIO AND VISUAL SYSTEM (w/o Microphone) SYSTEM DESCRIPTION


  1. COMPACT DISC PLAYER OUTLINE


    1. A compact disc player uses a laser pickup to read digital signals recorded on compact discs (CD). By converting the digital signals to analog, it can play music and other audio recordings. CD players can play 4.7-inch (12cm) discs.

      CAUTION:

      Because the CD player uses an invisible laser beam, do not look directly at the laser pickup. Be sure to operate the player as instructed.

      Tech Tips


      • Do not disassemble any part of the CD player.

      • Do not apply oil to the CD player.

      • Do not insert anything except CDs into the CD player.

  2. AVC-LAN DESCRIPTION


    1. What is AVC-LAN?

      A0137X4E03

      AVC-LAN, an abbreviation for "Audio Visual Communication Local Area Network", is a united standard developed by the manufacturers in affiliation with Toyota Motor Corporation. This standard pertains to audio and visual signals as well as switch and communication signals.

    2. Purpose:

      Recently, car audio systems have rapidly developed and the functions vastly changed. The conventional car audio system is being integrated with multi-media interfaces similar to those in navigation systems. At the same time, customers are demanding higher quality from their audio systems. This is merely an overview of the standardization background. The specific purposes are as follows.


      1. To solve sound problems, etc. caused by using components of different manufacturers through signal standardization.

      2. To allow each manufacturer to concentrate on developing products in their specialist fields. From this, reasonably priced products can be produced.

        Tech Tips


        • If a +B or GND short is detected in the AVC-LAN circuit, communication is interrupted and the audio system stops functioning.

        • If the audio system is equipped with a navigation system, the multi-display unit acts as the master unit. If there is no navigation system, the audio head unit acts as the master unit instead. If the radio and navigation is equipped, it is the master unit.

        • The radio and navigation provides resistance to make communication possible.

        • The car audio system with an AVC-LAN circuit has a diagnostic function.

        • Each component has a specified number (3-digit) called a physical address. Each function has a number (2-digit) called a logical address.

  3. COMMUNICATION SYSTEM OUTLINE


    1. Components of the audio system communicate with each other via the AVC-LAN.

    2. The master component of the AVC-LAN is a radio receiver with a 60 to 80 Ω resistor. This is essential for communication.

    3. If a short circuit or open circuit occurs in the AVC-LAN circuit, communication is interrupted and the audio system stops functioning.

  4. DIAGNOSTIC FUNCTION OUTLINE


    1. The audio system has a diagnostic function (the results are indicated on the master unit)

    2. A 3-digit hexadecimal component code (physical address) is allocated to each component on the AVC-LAN. Using this code, the component in the diagnostic function can be displayed.