FRONT DOOR SPEAKER INSPECTION


  1. INSPECT REAR NO. 3 SPEAKER ASSEMBLY


    1. Check the speaker installation.

      OK
      The speaker is securely installed.

    2. Visually check the speaker.

      OK
      The cone paper of the speaker is not torn.
    3. A013781E01
      Text in Illustration
      *a

      Component without harness connected

      (Rear No. 3 Speaker Assembly)

      Check the speaker resistance.


      1. Disconnect the rear No. 3 speaker connector.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always Approximately 4 Ω

        If the result is not as specified, replace the rear No. 3 speaker assembly.