RADIO RECEIVER REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER

    A0136KWE01

    1. Remove the control knob.

    2. Remove the screw <B>.

    3. Disengage the 4 clips and 3 claws and remove the cluster finish panel by pulling it up from underneath.

    4. Disconnect the connectors and remove the instrument cluster finish panel center.

  3. REMOVE RADIO RECEIVER

    A0138OAE01

    1. While pushing the fasteners shown in illustration A, remove the instrument cluster finish panel sub-assembly center by pulling the radio receiver toward you and disengaging the claws.