METER / GAUGE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips


  • Use these procedures to troubleshoot the combination meter.

  • *: Use the intelligent tester.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14V

    If the voltage is below 11V, recharge or replace the battery before proceeding.


    NEXT

  3. PROBLEM SYMPTOMS TABLE

    Result
    Result Proceed to
    Fault is not listed in Problem Symptoms Table A
    Fault is listed in Problem Symptoms Table B

    B

    Go to step 6
    A

  4. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Data List/Active Test Click here.

    2. Terminals of ECU Click here


      NEXT

  5. ADJUST, REPAIR OR REPLACE


    NEXT

  6. CONFIRMATION TEST*


    NEXT
    END