BACK DOOR LOCK INSPECTION


  1. INSPECT BACK DOOR LOCK ACTUATOR ASSEMBLY

    A0135T6E01

    1. Check the operation.


      1. Apply battery voltage to the back door lock actuator assembly and check the operation of the door lock motor sub-assembly.

        Standard
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Lock

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Unlock

        If the result is not as specified, replace the back door lock actuator assembly.