TRANSMITTER BATTERY REMOVAL


  1. REMOVE TRANSMITTER BATTERY

    A0138RC

    1. Remove the transmitter battery.


      1. Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.

        Note

        Do not use excessive force when prying apart the housing cover.

      2. A013824

        Remove the battery (lithium battery).

        Note


        • Do not push the terminals with your finger.

        • Do not use excessive force when prying up battery (lithium battery) as this may damage the terminals.

        • Do not touch the battery with wet hands. Water may cause rust.

        • Do not touch or move any components inside the transmitter as this may interfere with its proper operation.