WIPER SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.

  2. REMOVE STEERING COLUMN UPPER COVER

    A0136OJE02

    1. Remove the 2 screws while turning the steering wheel to the right and left.

    2. Disengage the 4 claws and remove the steering column cover upper.

    3. A0136TV

      Remove the steering column cover upper, as shown in the illustration (w/ tachometer).

    4. A0136HY

      If the steering column cover upper is difficult to remove, loosen the screw behind the tachometer, pull up and extend the tachometer, and then remove the steering cover upper (w/ tachometer).

  3. REMOVE STEERING COLUMN LOWER COVER

    A0136RZ

    1. Remove the screw and steering column lower cover.

  4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

    A0136JFE01

    1. Disconnect the 2 connectors.

    2. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the windshield wiper switch assembly.

      Note

      Do not press the claw too hard, as it may be damaged.