TURN SIGNAL FLASHER ASSEMBLY INSTALLATION


  1. INSTALL COMBINATION METER ASSEMBLY

    A0137AB

    1. Connect the 14 connectors.

    2. Install the combination meter with the 2 bolts.

      Torque:
      6.5 N*m  { 66 kgf*cm, 58 in.*lbf }

  2. INSTALL TACHOMETER (W/ TACHOMETER)

    A0135U6

    1. Install the tachometer with the bolt.

      Torque:
      6.5 N*m  { 66 kgf*cm, 58 in.*lbf }

    2. Connect the connector.

  3. INSTALL STEERING COLUMN COVER UPPER

    A0136TV

    1. Install the steering column cover upper, as shown in the illustration (w/ tachometer).

    2. A0136OJE02

      While turning the steering wheel to the right and left, engage the 4 claws and install the steering column cover upper with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }
    3. A0137VI

      Tighten the screw behind the tachometer (w/ tachometer).

      Note

      Tighten the screw if the tachometer has been extended and the column cover has been removed.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }