TURN SIGNAL FLASHER ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE STEERING COLUMN COVER UPPER

    A0136OJE02

    1. Remove the 2 screws while turning the steering wheel to the right and left.

    2. Disengage the 4 claws and remove the steering column cover upper.

    3. A0136TV

      Remove the steering column cover upper, as shown in the illustration (w/ tachometer).

    4. A0136HY

      If the steering column cover upper is difficult to remove, loosen the screw behind the tachometer, pull up and extend the tachometer, and then remove the steering cover upper (w/ tachometer).

  3. REMOVE TACHOMETER (W/ TACHOMETER)

    A0135U6

    1. Disconnect the connector.

    2. Remove the bolt and tachometer.

  4. REMOVE COMBINATION METER ASSEMBLY

    A0137AB

    1. Remove the 2 bolts.

    2. Disconnect the 14 connectors and remove the combination meter.