WASHER MOTOR REMOVAL


  1. REMOVE FRONT BUMPER COVER

    A0136Z7E01

    1. Apply protective tape to the outer circumference of the front bumper cover, as shown in the illustration.

      Text in Illustration
      *1 Protective Tape

    2. Using a clip remover, remove the clip.

    3. Remove the 3 bolts, 5 screws and 2 clips.

    4. A0138ON

      Disengage the 10 claws and remove the front bumper cover.

    5. Disconnect the connectors.

      Tech Tips

      If the vehicle is equipped with fog light and daytime running lights, disconnect the connectors.

    6. A0138Q8

      Remove the 2 clips.

  2. REMOVE HEADLIGHT UNIT RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  3. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    1. A0138XV

      Remove the 2 bolts.

    2. Disconnect the 2 connectors.

    3. Disengage the clamp (with fog light).

    4. Disconnect the 2 washer hoses and drain the windshield washer fluid.

    5. A0136LU

      Remove the windshield washer jar assembly in the direction indicated by the arrow as shown in the illustration.

  4. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01378V

      Remove the 2 windshield washer motor and pump assemblies.