REAR COMBINATION LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR COMBINATION LIGHT ASSEMBLY

    A0137CL

    1. Remove the screw and clip, then open the roof side garnish inner.

    2. A0137PF

      Disconnect the connector.

    3. Remove the nut.

    4. A01392A

      Slide the tail light (rear combination light) assembly LH toward the rear of the vehicle.

  3. REMOVE REAR COMBINATION LIGHT BULB

    A0136EHE01

    1. Disengage the 8 claws and remove the bulb holder.

    2. A01388Z

      Turn the 3 rear combination light bulbs, in the direction indicated by the arrows in the illustration, to remove them.