DAYTIME RUNNING LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for both the RH and LH side.

  • The procedure described below is for the LH side.


  1. REMOVE FRONT SPOILER (w/ Front Spoiler)

    Click here

  2. REMOVE FRONT BUMPER COVER

    A0136Z7E01

    1. Apply protective tape to the outer circumference of the front bumper cover, as shown in the illustration.

      Text in Illustration
      *1 Protective Tape

    2. Using a clip remover, remove the clip.

    3. Remove the 3 bolts, 5 screws and 2 clips.

    4. A0138ON

      Disengage the 10 claws and remove the front bumper cover.

    5. Disconnect the connectors.

      Tech Tips

      If the vehicle is equipped with fog light and daytime running lights, disconnect the connectors.

    6. A0138Q8

      Remove the 2 clips.

  3. REMOVE DAYTIME RUNNING LIGHT ASSEMBLY


    1. A01384D

      Disengage the 2 clamps.

    2. A0136BQ

      Remove the 3 screws and separate the daytime running light bracket.

    3. A0137RD

      Remove the screw.

    4. A0138KK

      Slide the daytime running light in the direction shown in the illustration to disengage the 2 guides.

    5. A013604

      Disconnect the connector and remove the daytime running light assembly from the daytime running light bracket.