HEADLIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure listed below is for the LH side.

  • Set the headlight leveling switch to 0 (zero) before conducting the procedure.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT BUMPER COVER

    A0138CFE01

    1. Apply protective tape to the outer circumference of the front bumper cover, as shown in the illustration.

    2. Using a clip remover, remove the clip.

    3. Remove the 3 bolts, 5 screws and 2 clips.

    4. A01360O

      Disengage the 13 claws and remove the front bumper cover.

    5. A0136YZ

      Remove the 2 clips.

  3. REMOVE HEADLIGHT UNIT LH

    A0137LE

    1. Remove the 3 screws.

    2. Disconnect the 4 connectors, then remove the headlight unit LH.