HAZARD WARNING SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER

    A0136KWE01

    1. Remove the control knob.

    2. Remove the screw <B>.

    3. Disengage the 4 clips and 3 claws and remove the cluster finish panel by pulling it up from underneath.

    4. Disconnect the connectors and remove the instrument cluster finish panel center.

  3. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY

    A01362FE01

    1. Disengage the 4 claws and remove the hazard warning signal switch assembly.