REAR SEAT OUTER BELT ASSEMBLY (for 3 Door) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.


  1. REMOVE REAR SEAT CUSHION ASSEMBLY (for Separate Seat Type)

    A0137NL

    1. Disengage the 4 hooks and remove the rear seat cushion.

  2. REMOVE REAR SEAT CUSHION ASSEMBLY (for Bench Seat Type)

    A01392V

    1. Disengage the 4 hooks and remove the rear seat cushion.

  3. REMOVE REAR SEAT BACK ASSEMBLY (for Separate Seat Type)

    A0136X9

    1. Release the 2 hooks.

    2. Remove the 4 nuts, 4 bolts, 2 rear seat inner belts and rear seat back.

  4. REMOVE REAR SEAT BACK ASSEMBLY (for Bench Seat Type)

    A0136F8

    1. Disengage the 2 hooks.

    2. Remove the 2 nuts, 2 bolts and rear seat back.

  5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP

    A01373O

    1. Remove the front door opening trim weatherstrip.

  6. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    A01366X

    1. Remove the package tray trim panel.

  7. REMOVE QUARTER INSIDE TRIM BOARD

    A0136LR

    1. Remove the bolt and lap outer anchor plate of the rear seat outer belt.

    2. A0137YR

      Using a clip remover, remove the clip.

    3. Disengage the 6 claws and 7 clips, and remove the quarter inside trim board.

  8. REMOVE ROOF SIDE RAIL GARNISH REAR (w/ Curtain Shield Airbag)

    A0137AR

    1. Disengage the 5 claws and 2 clips, and remove the roof side rail garnish rear.

  9. REMOVE ROOF SIDE RAIL GARNISH REAR (w/o Curtain Shield Airbag)

    A0138DT

    1. Disengage the 5 claws and 2 clips, and remove the roof side rail garnish rear.

  10. REMOVE ROOF SIDE GARNISH INNER

    A013736

    1. Remove the clip and screw.

    2. Disengage the 4 claws and 7 clips, and remove the roof side garnish inner.

  11. REMOVE REAR SEAT OUTER BELT ASSEMBLY

    A0137FV

    1. Remove the bolt and through anchor.

    2. Remove the bolt, 2 hooks and retractor.