REAR SEAT INNER BELT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY (for Separate Seat Type)

    A013709E01

    1. Install the rear seat inner belt with the bolt.

      Torque:
      42 N*m  { 430 kgf*cm, 31 ft.*lbf }

      Note

      Do not place the rear seat inner belt over the convex areas or flange area of the rear seat back frame.

  2. INSTALL REAR SEAT INNER BELT ASSEMBLY (for Bench Seat Type)

    A0137BRE01

    1. Install the rear seat inner belt with the bolt.

      Torque:
      42 N*m  { 430 kgf*cm, 31 ft.*lbf }

      Note

      Do not place the rear seat inner belt over the convex areas of the floor panel.

  3. INSTALL REAR SEAT CUSHION ASSEMBLY (for Separate Seat Type)

    A0137NL

    1. Engage the 4 hooks and install the rear seat cushion.

  4. INSTALL REAR SEAT CUSHION ASSEMBLY (for Bench Seat Type)

    A01392V

    1. Engage the 4 hooks and install the rear seat cushion.