FRONT SEAT SIDE AIRBAG ASSEMBLY REMOVAL

CAUTION:

Some of these service operations affect the SRS airbag system. Be sure to read the precautionary notices concerning the SRS airbag system before servicing Click here.

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT SEAT ASSEMBLY

    A0136YG

    1. Using a clip remover, remove the wire harness clamp and connector clamp.

    2. Disconnect the buckle switch connector (driver seat only).

    3. Disconnect the front seat side airbag connector, as shown in the illustration (w/ front seat side airbag).

    4. A0138FD

      Using "Torx" socket wrench T40, remove the 4 bolts and front seat.

  3. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY

    A0138AQ

    1. Unfasten the 2 zippers.

    2. A0136HN

      Using a clip remover, remove the 3 wire harness clamps.

    3. A0138SA

      Remove the 2 nuts and front seat side airbag.

  4. REMOVE SEAT AIRBAG HOOK

    A0138VK

    1. Remove the seat airbag hook.