CURTAIN SHIELD AIRBAG ASSEMBLY (for 5 Door) ON-VEHICLE INSPECTION


  1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)


    1. Perform a diagnostic system check Click here.

    2. With the curtain shield airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the front pillar garnish or roof headlining with a new one:

      Any cuts, minute cracks or marked discoloration on the front pillar garnish and roof headlining around the curtain shield airbag.

      A0135UL

  2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)

    A0137JS

    CAUTION:

    For curtain shield airbag removal and installation procedures, Click here and Click here, be sure to carefully follow the correct procedure.


    1. Perform a diagnostic system check Click here.

    2. With the curtain shield airbag removed from the vehicle, as mentioned below, replace the curtain shield airbag with a new one:


      • Any cuts, minute cracks or marked discoloration on the curtain shield airbag.

      • Any cracks or other damage to the connector.