FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

CAUTION:

Some of these service operations affect the SRS airbag system. Be sure to read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. INSTALL NO. 3 INSTRUMENT PANEL WIRE

    A01376Y

    Note

    When handling the airbag connector, do not damage the airbag wire harness.


    1. Connect the airbag connector, as shown in the illustration.

    2. Install the connector clamp.

  2. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

    A0138B2

    1. Engage the 10 claws and install the front passenger airbag.

    2. Tighten the 2 nuts.

      Torque:
      6.0 N*m  { 60 kgf*cm, 53 in.*lbf }

  3. INSTALL INSTRUMENT PANEL ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  5. INSPECT SRS WARNING LIGHT

    Click here