FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL

CAUTION:

Some of these service operations affect the SRS airbag system. Be sure to read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE INSTRUMENT PANEL ASSEMBLY

    Click here

  3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

    A0138B2

    1. Remove the 2 nuts.

    2. Disengage the 10 claws and remove the front passenger airbag.

  4. REMOVE NO. 3 INSTRUMENT PANEL WIRE

    A0138KB

    Note

    When handling the airbag connector, do not damage the airbag wire harness.


    1. Remove the connector clamp.

    2. Disconnect the connector, as shown in the illustration.