SIDE AIRBAG SENSOR (for 5 Door) REMOVAL

CAUTION:

Some of these service operations affect the SRS airbag system. Be sure to read the precautionary notices concerning the SRS airbag system before servicing Click here.

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure listed below is for the RH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR SEAT CUSHION ASSEMBLY (for Separate Seat Type)

    A0137NL

    1. Disengage the 4 hooks and remove the rear seat cushion.

  3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Bench Seat Type)

    A01392V

    1. Disengage the 4 hooks and remove the rear seat cushion.

  4. REMOVE REAR SEAT BACK ASSEMBLY (for Separate Seat Type)

    A0136X9

    1. Release the 2 hooks.

    2. Remove the 4 nuts, 4 bolts, 2 rear seat inner belts and rear seat back.

  5. REMOVE REAR SEAT BACK ASSEMBLY (for Bench Seat Type)

    A0136F8

    1. Disengage the 2 hooks.

    2. Remove the 2 nuts, 2 bolts and rear seat back.

  6. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP

    A01387H

    1. Remove the front door opening trim weatherstrip.

  7. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

    A0137N9

    1. Remove the rear door opening trim weatherstrip.

  8. REMOVE REAR SEAT OUTER BELT ASSEMBLY

    A0136AS

    1. Remove the bolt and lap outer anchor plate of the rear seat outer belt.

  9. REMOVE REAR SEAT SIDE GARNISH

    A0136F9

    1. Using a clip remover, remove the clip.

    2. Disengage the 6 claws and clip, and remove the rear seat side garnish.

  10. REMOVE CENTER PILLAR GARNISH LOWER

    A0137HU

    1. Disengage the 3 claws and 2 clips, and remove the center pillar garnish.

  11. REMOVE CENTER PILLAR GARNISH UPPER

    A0138E5

    1. Remove the bolt and lap outer anchor plate of the front seat outer belt.

    2. A0138AK

      Disengage the claw and clip, and remove the center pillar garnish.

  12. REMOVE FRONT SEAT OUTER BELT ASSEMBLY

    A0136M8

    1. Remove the bolt and through anchor of the front seat outer belt.

    2. A01362C

      Disconnect the pretensioner connector, as shown in the illustration.

    3. A013634

      Remove the 2 bolts, 2 hooks and retractor.

  13. REMOVE SIDE AIRBAG SENSOR ASSEMBLY

    A01385N

    1. Remove the nut and hook.

    2. A013804

      Disconnect the airbag connector and remove the side airbag sensor, as shown in the illustration.