STEERING PAD REMOVAL

CAUTION:

Some of these service operations affect the SRS airbag system. Be sure to read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE STEERING PAD

    A0135YBE01

    1. Place the front wheels facing straight ahead.

    2. Using "Torx" socket wrench T30, loosen the 2 screws until the screw thread catches on the screw case.

    3. A01389P

      Pull the steering pad out of the steering wheel and support the steering pad with one hand, as shown in the illustration.

      Note

      When removing the steering pad, do not pull the airbag wire harness.

    4. Disconnect the horn connector.

    5. Disconnect the airbag connector, as shown in the illustration.

      Note

      When handling the airbag connector, do not damage the airbag wire harness.

    6. Remove the steering pad.