HEATER BLOWER MOTOR RELAY INSPECTION


  1. INSPECT HEATER BLOWER MOTOR RELAY

    A0136YIE01

    1. Check the resistance.


      1. Using an ohmmeter, measure the resistance between each terminal.

        Standard resistance
        Tester Connection Specified Condition
        3 - 4 Below 1 Ω
        3 - 4

        10 kΩ or higher

        (Apply battery voltage to terminals 1 and 2)
        3 - 5 10 kΩ or higher
        3 - 5

        Below 1 Ω

        (Apply battery voltage to terminals 1 and 2)

        If the result is not as specified, replace the relay.