AIR CONDITIONING SWITCH INSPECTION


  1. INSPECT COOLER CONTROL SWITCH ASSEMBLY

    A0136YFE01

    1. Check the cooler control switch resistance.


      1. Using an ohmmeter, measure the resistance and check the results in accordance with the values in the table below.

        Standard Resistance
        Tester Connection Blower Switch Position Specified Condition
        2 - 3 OFF 10 KΩ or higher
        2 - 3 ON Below 1 Ω

        If the result is not as specified, replace the cooler control switch assembly.

    2. A0138FXE01

      Check the A/C indicator operation.


      1. Connect the positive (+) lead from the battery to terminal 2 (IG+) and the negative (-) lead to terminal 1 (AIND).

      2. Push the A/C switch in and check that the indicator lights up.

        Standard
        Indicator lights up

        If the result is not as specified, replace the cooler control switch assembly.