STEERING COLUMN ASSEMBLY DISASSEMBLY


  1. REMOVE TRANSPONDER KEY COIL

    A0137W9E01

    1. Using a screwdriver, widen the 2 claws hung on the steering column upper with switch bracket by approximately 1.0 mm (0.039 in.).

    2. Pull the transponder key coil toward the rear of the vehicle with the claw open.

      Note

      Do not apply excessive force to the case because this may damage it.

  2. REMOVE STEERING COLUMN UPPER W/ SWITCH BRACKET ASSEMBLY


    1. Clamp the steering column assembly in a vise between aluminum plates.

    2. Using a drill, make a hole in the steering lock set bolt and set a screw extractor.

    3. A0137Q3

      Using the screw extractor, remove the steering lock set bolt.

    4. A0138U7

      Turn the ignition switch to ACC and pull out the steering column upper w/ switch bracket assembly while pressing in the push button with a screwdriver.

      Note

      Be sure to press in the push button.